Dodge Intrepid - Page 658

NOTE: The OD/UD clutch reaction plate has a step
on both sides. Install the OD/UD clutches reaction
plate tapered step side up.
(14) Remove the OD/UD reaction plate (Fig. 274).
(15) Remove the first UD clutch disc (Fig. 275).
(16) Remove the UD clutch flat snap ring (Fig.
276).
NOTE: Tag underdrive clutch pack for reassembly
identification.
(17) Remove the UD clutch pack (Fig. 277).
Fig. 274 OD/UD Reaction Plate
1 - OD/UD CLUTCH REACTION PLATE (STEP SIDE DOWN)
Fig. 275 Remove Last UD Clutch Disc
1 - ONE UNDERDRIVE CLUTCH DISC
Fig. 276 UD Clutch Flat Snap Ring
1 - UNDERDRIVE CLUTCH REACTION PLATE FLAT SNAP RING
2 - SCREWDRIVER
Fig. 277 Underdrive Clutch Pack
1 - CLUTCH PLATE
2 - ONE UD CLUTCH DISC
3 - CLUTCH DISC
LH TRANSAXLE 21 - 111
INPUT CLUTCH ASSEMBLY (Continued)