Dodge Intrepid - Page 750

DECKLID
TABLE OF CONTENTS
page page
COVER
REMOVAL .............................13
INSTALLATION .........................13
DECKLID
REMOVAL .............................14
INSTALLATION .........................14
HINGE
REMOVAL .............................14
INSTALLATION .........................14
LATCH
REMOVAL .............................15
INSTALLATION .........................15
LATCH STRIKER
REMOVAL .............................16
INSTALLATION .........................16
LOCK CYLINDER
REMOVAL .............................16
INSTALLATION .........................16
EMERGENCY RELEASE CABLE
REMOVAL .............................16
INSTALLATION .........................16
SLAM BUMPER
REMOVAL .............................17
INSTALLATION .........................17
SUPPORT CYLINDER
REMOVAL .............................17
INSTALLATION .........................17
COVER
REMOVAL
(1) Release decklid latch and open decklid.
(2) Remove the grab handle, if equipped.
(3) Remove push pin fasteners attaching decklid
latch cover to decklid (Fig. 1).
(4) Remove decklid latch cover from vehicle.
INSTALLATION
(1) Place decklid latch cover in position on vehicle
(Fig. 1).
(2) Install push pin fasteners attaching decklid
cover to decklid.
(3) Install grab handle, if equipped.
Fig. 1 DECKLID LATCH COVER
1 - PUSH PIN
2 - DECKLID WIRING
3 - DECKLID
4 - DECKLID LATCH ASSEMBLY
5 - DECKLID LATCH COVER
LH DECKLID 23 - 13