Draytek Vigor2762 series User Manual

Static IPv6
Static IPv6
If your ISP provides a static IPv6 address for you, you may configure that IPv6 address for
WAN by doing the following steps:
1. Set Connection Type to Static IPv6.
2. Enter the IPv6 address and Prefix Length which provided by the ISP, and click Add.
3. You should see the IPv6 address in Current IPv6 Address Table. Then, specify the IP
address of IPv6 Gateway.
Vigor2762 Series User’s Guide
104

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English