3. For adding a new service type, click Add to open the following page.
Available settings are explained as follows:
Item Description
Service Name Type in a new service for your request. The maximum
length of the name you can set is 11 characters.
Service Type Choose the type (TCP, UDP or TCP/UDP or other) for the
new service.
Port Configuration Type - Click Single or Range as the Type. If you select
Range, you have to type in the starting port number and the
end porting number on the boxes below.
Port Number – Type in the starting port number and the
end porting number here if you choose Range as the type.
5. After finishing all the settings here, please click OK to save the configuration.
By the way, you can set up to 10 service types. If you want to edit/delete an existed service
type, please select the radio button of that one and click Edit/Edit for modification.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
