Available settings are explained as follows:
Item Description
Protocol /
Encapsulation
Choose PPPoE/PPPoA for WAN1 interface.
VPI Type in the value provided by ISP.
Auto detect – Click this button to have the VPI and VCI to
be detected by the system automatically
VCI Type in the value provided by ISP.
Fixed IP Click Yes to enable Fixed IP feature.
IP Address Type the IP address if Fixed IP is enabled.
Primary DNS Type in the primary IP address for the router.
Secondary DNS Type in secondary IP address for necessity in the future.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
2. After finished the above settings, simply click Next.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
