5. Now, you can enjoy surfing on the Internet.
MPoA
MPoA
1. Choose WAN1 as WAN Interface and click the Next button; you will get the following
page.
Available settings are explained as follows:
Item Description
Protocol There are two modes offered for you to choose for WAN1
interface. Choose MPoA as the protocol.
For ADSL Only Such field is provided for ADSL only. You have to choose
encapsulation and type the values for VPI and VCI. Or, click
Auto detect to find out the best values.
Fixed IP Click Yes to enable Fixed IP feature.
IP Address Type the IP address if Fixed IP is enabled.
Subnet Mask Type the subnet mask.
Default Gateway Type the IP address as the default gateway.
Primary DNS Type in the primary IP address for the router.
Secondary DNS Type in secondary IP address for necessity in the future.
Back Click it to return to previous setting page.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
