Static IP
Static IP
1. Choose WAN2 as the WAN Interface and click the Next button. The following page will
be open for you to specify Internet Access Type.
2. Click Static IP as the Internet Access type. Simply click Next to continue.
Available settings are explained as follows:
Item Description
WAN IP Type the IP address.
Subnet Mask Type the subnet mask.
Gateway Type the IP address of gateway.
Primary DNS Type in the primary IP address for the router.
Secondary DNS Type in secondary IP address for necessity in the future.
Back Click it to return to previous setting page.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
