Draytek Vigor2762 series User Manual

by ISP.
 Domain Name: Type in the domain name that
you have assigned.
DHCP Client Identifier for some ISP
 Enable: Check the box to specify username and
password as the DHCP client identifier for some
ISP.
 Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.
 Password: Type a password. The maximum
length of the password you can set is 62
characters.
Specify an IP address – Click this radio button to specify
some data if you want to use Static IP mode.
 IP Address: Type the IP address.
 Subnet Mask: Type the subnet mask.
 Gateway IP Address: Type the gateway IP
address.
Default MAC Address: Click this radio button to use default
MAC address for the router.
Specify a MAC Address: Some Cable service providers
specify a specific MAC address for access authentication. In
such cases you need to click the Specify a MAC Address and
enter the MAC address in the MAC Address field.
DNS Server IP Address Type in the primary IP address for the router if you want to
use Static IP mode. If necessary, type in secondary IP
address for necessity in the future.
After finishing all the settings here, please click OK to activate them.
Vigor2762 Series User’s Guide
70

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English