114
PC Controller Setting
Enter a JOB name in the
JOB Name
box.
You can enter up to 30 characters.
Usable characters;
• Alphabetical letters (A to Z, a to z)
• Numeric characters
• Symbols
REFERENCE
Paper size (Standard size)
Select a document size from the
Paper size
box.
Width
(Custom size)
To use custom size documents, enter a value of the
document width in the
Width
box.
If you have selected standard size in step
11, the
selected document width value appears here.
Enter a JOB number in the
JOB No.
box.
You can set from 1 to 250.
If you have selected
RTM (rotary tool module (option))
in the
Slot 3 [L/R]
or
Slot 4 [L/R]
box in steps 6 and 7,
select a tool for each slot in a similar way to step 8.
To Next Page
Loading...
