125
4
4
Other Functions
Separating Prints with Tape Strips
(Available only with Tape Cluster Unit)
When only the specifi ed number of sets is printed with the specifi ed number of prints taken as
one set, tape strips are inserted between the sheets after each set of prints, automatically
separate prints into group. You can enter up to 90 groups of 'number of prints' x 'number of sets'.
The optional tape cluster is required for separating prints into group with tape strips.
When using this function, refer to the Instruction Manual of “Tape Cluster”.
Special Function: Batch Print / Sequential Batch Print
IMPORTANT
To Next Page
Loading...
Need help?
General