169
5
5
Replacing Consumables
● Use a master ejection core designed only for use in this machine.
● If you use a security master ejection box, please contact a manager who control it.
The message “REMOVE USED MASTER” is displayed on the touch panel LCD when the
master ejection core is full. Dispose of used masters wound onto the ejection core according
to the following procedure.
How to Dispose of Used Masters
Open the “master ejection box open button” to open
the “master ejection box”.
Open the “master ejection box cover” while pressing
the “master ejection box cover open lever”.
Holding the edges of the “master ejection core”, pull
out the core and remove the “used master” over a
trash box while tilting the core.
Ink adheres to the master ejection core.
Take care to prevent ink from getting onto your
hands or clothes.
How to Dispose of Used Masters
Continue Page....
IMPORTANT
IMPORTANT
V3M0518
V3M0519
V3M0520
To Next Page
Loading...
Need help?
General