46
How to Adjust Master Darkness
Touch “DARKNESS”.
Touch “DARK” if the color of the document is light.
Touch “LIGHT” if the color of the document is dark.
Touch “OK”.
Master darkness adjusted in step 2 is set.
● To reset to standard:
* Touch “DARKNESS” again and adjust master darkness to “±0”, and then touch
“OK”.
* Press the
RESET key.
In this case, all settings are reset to Standard Mode.
Adjusting Darkness
Master Darkness
Master darkness can be adjusted in 5 steps.
When the color of the document is light, touch “DARK”.
When the color of the document is dark, touch “LIGHT”.
● Set master darkness before starting master making.
REFERENCE
IMPORTANT
To Next Page
Loading...
Need help?
General