24
Loading Documents
How to Load Document
The document can be loaded in the “portrait” or landscape” position.
● A4, B5, and A5-size documents can be loaded in the “portrait” or landscape” position.
●
Use the
portrait
position when enlarging or reducing from standard-size documents to
standard-size paper, such as A4 to A3.
● A3 and B4 documents can only be loaded in the portrait position.
Gently open the “scanner cover”.
Place the “document face down” on the document
glass plate, aligned with the guide (scale).
When you load a non standard-size document,
place it with the center of the document aligned
with the arrow on the guide (scale).
Gently close the “scanner cover”.
How to Load Document on the Glass Plate
● When you place a thick document such as a
book on the document glass plate, take care
not to force the scanner cover as this may
damage the document glass plate with a risk
of personal injury.
● Turn the power switch ON before placing a
document. If not, the machine cannot
recognize the document size correctly.
● If the document is not aligned with the center of
the guide (scale), a message is displayed on
the touch panel LCD. Set the document again.
●ヨコ置き ●タテ置き
● Landscape (Lateral) Placement
(to paper feed direction)
Document
Scale
Arrow
Printing face
down
IMPORTANT
IMPORTANT
REFERENCE
● Portrait (Vertical) Placement
(to paper feed direction)
V3M0211
V3M0212
To Next Page
Loading...
Need help?
General