2
2
35
Basic Operations
Print Speed Adjustment
Touch ”TOP SPEED”.
A message appears on the touch panel LCD.
If you select “YES”, use the paper according to the re-
strictions below. If the paper to be used does not meet
the restrictions, select “NO”.
RESTRICTIONS in TOP SPEED
●
Use size B4 or smaller.
●
Paper stacking performance may deteriorate
when using thin paper.
●
Print position performance may deteriorate
slightly.
●
Some paper may cause wrinkles.
When TOP SPEED is valid, the speed lamp blinks at the
position of speed 5.
How to Set TOP SPEED
● To return to default setting (about 100 pages per minute):
●
Press the LOW or HIGH key repeatedly until the speed
lamp moves to the center.
●
After pressing the STOP key, press the RESET key.
In this case, all settings are reset to standard mode.
However, when default settings have been changed in Initial
Confi guration setting, the print speed is the currently set print
speed.
IMPORTANT
REFERENCE
To Next Page
Loading...
Need help?
General