59
4
4
Other Functions
How to Set Multiple Exposure (2, 4, 8, and 16-up)
Continue Page....
Proceed with steps 1 to 5 of the sequence described
in “Basic Printing”.
(“Basic Printing” → see p.27)
Touch "PROPERTY".
Touch “EDIT”.
Touch “MULTIPLE EXPOSURE”.
A list of multiple exposure appears.
Touch your preferred multiple exposure (2, 4, 8, or 16-up).
"2" is selected here.
"CUT LINE" screen appears.
Edit Function: Multiple Exposure
If you want to put a cut line, touch "ON".
If not, touch “OFF”.
"MULTIPLE EXPOSURE” will be set.
To return to “OFF” (standard):
● Touch “MULTIPLE EXPOSURE” and then touch
“OFF”.
● Press the
RESET key.
In this case, all settings will be returned to Standard
Mode.
REFERENCE
To Next Page
Loading...
Need help?
General