146
Touch "FINE START".
Select setting.
● “SET FOR EVERY MASTER MAKE”
Fine Start functions for every master making.
Touch "END".
● “SET FOR NEXT MASTER MAKE”
Fine Start functions only once and will be
automatically set to “OFF” for its following master
making.
“SET FOR EVERY MASTER MAKE” is touched here.
Select Fine Start level.
MIN: It takes less time to make the fi rst print after a
master is made than "MID".
First print image may be lighter than that of
"MID".
MID: Fine Start functions by the condition according
to the time elapsed.
MAX: It takes more time to make the fi rst print after
a master is made than "MID".
First print image may be darker than that of
"MID".
"MID" is touched here.
“FINE START” is set.
Setting Function: Fine Start
To Next Page
Loading...
