190
When “MASTER EJECTION ERROR” is Displayed
Lift up the “drum stopper” and turn the drum by
hand to set the “Lever” in step 5 to an easily
operable position.
Push down the “lever”.
The “master clamp” opens and the edge of the
master will be released from the clamp. If the master
is stuck, release it by hand.
Return the “lever” to its original position, and
turn the drum by hand to remove the “master”.
Continue the above steps until the “master” is
removed completely.
Turn the “drum” by hand until the “drum stopper”
fi ts into the groove.
Make sure that the peeled paper does not
stick to your clothing.
IMPORTANT
V3M0624
V3M0625
V3M0626
V3M0627
To Next Page
Loading...
Need help?
General