DURKOPP ADLER 867 Operating Manual

Maintenance
70 Operating manual 867 Version 01.0 - 12/2012
Oil to be used:
Only DA 10 or an oil of equivalent quality may be used for the
machine, which has the following properties:
• Viscosity at 40° C: 10 mm²/s
• Flash point: 150 °C
Machine damage possible due to incorrect oil.
An incorrect oil type can cause damage to the machine.
Only use oil that complies with the data in the operating man-
ual.
ATTENTION
Risk of environmental damage from oil.
Oil is a pollutant and must not enter the sewage sys-
tem or the soil.
Carefully collect old oil and dispose of oil and oil-
contaminated machine parts in the legally pre-
scribed manner.
ENVIRONMENTAL

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz