Dynojet 200iX User Manual

CHAPTER 3
Wheel Clamp
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
3-28
2 Place the wheel clamp on the carriage. Align the four holes on the wheel clamp
with the holes on the carriage.
3 Secure the wheel clamp to the carriage using four 3/8-16 x 1/2-inch bolts, lock
washers and flat washers.
Figure 3-28: Secure the Wheel Clamp to the Carriage
WC013
wheel clamp

Dynojet 200iX Specifications

General

Brand	Dynojet
Model	200iX
Category	Diagnostic Equipment
Language	English