Emax II operation manual
130
The display says:
Harmony 2: off
Use Data Slider
Use the ON and OFF buttons or the DATA SLIDER to adjust the interval or turn the
function off.
12. The next setup menu is for external clock. Press the right arrow cursor button, and
the display says:
Clock: internal
Use Data Slider
Use the data slider buttons to choose the desired clock option. Your choices are:
● internal Emax II’s arpeggiator syncs to the internal clock at the tempo chosen
in the previous step.
● MIDI Emax II’s arpeggiator syncs to MIDI clock signals coming in over the
MIDI in port.
● click 24 Emax II’s arpeggiator syncs to 24 pulses-per-quarter-note signals
appearing at the clock input jack.
● click 48 Emax II’s arpeggiator syncs to 48 pulses-per-quarter-note signals
appearing at the clock input jack.
● click 96 Emax II’s arpeggiator syncs to 96 pulses-per-quarter-note signals
appearing at the clock input jack.
To jump back to the module identifier press ENTER, otherwise press the right arrow
cursor button to continue the setup.
13. Moving right along, the next option is:
Velocity: 127
Use Data Slider
Arpeggiator
PRESET DEFINITION
To Next Page
Loading...