Eaton easy500, easy700

4 Wiring  with
4.8 Weekly timer
114 Operating instructions 05/10 MN05013003Z-EN www.eaton.com
4.8.1 Parameter display and parameter set for weekly timer:
The parameter display for a weekly timer is used to modify the weekdays,
the closing delay, the break time and enable of the parameter display.
4.8.1.1 Compatibility between easy400 and easy500, easy600 and easy700: parameter display
weekly timer
The parameter display for easy500 and easy700 has been changed. The
easy400 and easy600 parameters can be found at the following points.
Table 14: On and off times
Parameter display in RUN mode:
Ö1 A +
D SO
ON --:--
OFF --:--
Ö1 weekly timer function relay 1
A,B,
C,D
Time switch channels
+ • + appears in the PARAMETER menu,
•
- does not appear in the PARAMETER menu
D Day setting, from -- to --
ON Closing delay
OFF Off time
easy400, easy600
parameters
easy500, easy700
parameters
Ö1 =Ö1
AA-BB =AA-BB
A =A
ON --:-- =ON --:--
OFF --:-- =OFF --:--
+ =+
Parameters Meaning Meaningful values
Weekdays Monday to Sunday MO, TU, WE, TH, FR, SA, SU, --
Closing delay Hours: Minutes
No time set at “--:--”
00:00 to 23:59, --:--
Off time
Hours: Minutes
No time set at “--:--”
00:00 to 23:59, --:--
Selected channel, current time (only in RUN)
Weekday(s) from - to
Closing delay
Off time
# Contact has not switched.
â Contact has switched.
fAA-BBg
n dÖ1
ON s--:--n A
OFFy--:--b +
Ö1 A +
D AA-BB
ON --:--
OFF --:--
Ö1 A 11:30 +
D MO-FR
ON 06:45
OFF 19:30 â