Eaton easy500, easy700

1 
1.5 operating principles
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 17
1.5.4 Status indicator 
1.5.5 Status display for local expansion
1.5.6 Advanced Status display
easy500: input 1 to 8,
easy700: input 1 to 12
Inputs
Weekday/Time or Weekday/Date
Outputs RUN/STOP mode
easy500: output 1 to 4,
easy700: output 1 to 6 or 8
On: 1, 2, 3, 4/Off:…
.2..5.......
P-
MO 11:50
Q ..34..STOP
.2..5.......
P-
2010-04-01
Q ..34..STOP
1.......9...
RS AC P-
MO 10:42
1.....7. RUN
Inputs
Expansion device
Weekday/Time or Weekday/Date
Outputs
On: 1, 2, 3, 4/Off:…
RS = Expansion functioning correctly
1.......9...
RS AC P-
MO 10:42
1.....7. RUN
Retention/debounce AC expansion ok/P buttons
Start behavior
RE
: Retention switched on
I
: Debounce switched on
AC
: AC expansion functioning correctly
DC
: DC expansion functioning correctly
GW
: Bus coupling module detected
GW flashes: Only easy200-easy detected. I/O expansion not detected.
04.03.17 Display of actual device date
ST
: When the power supply is switched on, easy switches to STOP mode
12...6.89...
RE I AC P-
04.03.17 ST
123.5.78 RUN