7 What Happens If …?
7.1 Messages from the system
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 203
7 What Happens If …?
You may sometimes find that easy does not do exactly what you expect. If
this happens, read through the following notes which are intended to help
you solve some of the problems you may encounter.
You can use the power flow display in easy to check the logic operations in
the easy circuit diagram with reference to the switching states of contacts
and relays.
Only qualified persons should test easy voltages while the device is in
operation.
7.1 Messages from the system
easy system messages
on the LCD
Explanation Remedy
No display Power supply interrupted Switch on the power supply
easy LCD faulty Replace easy
Continuous display
TEST: AC Self-test aborted Replace easy
TEST: EEPROM
TEST: DISPLAY
TEST: CLOCK
ERROR: I2C Memory card removed or not inserted correctly
before saving
Inserting the memory card
Memory card faulty Replace memory card
easy is faulty Replace easy
ERROR: EEPROM The memory for storing the retentive values or
the easy circuit diagram memory is faulty.
Replace easy
ERROR: CLOCK
Clock error Replace easy
ERROR: LCD
LCD is faulty Replace easy
ERROR: ACLOW Incorrect AC voltage Test the voltage
easy is faulty Replace easy
To Next Page
Loading...
