Eaton easy500, easy700

5 settings
5.3 Alter parameters
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 169
▶ Select the required function block with Í or Ú .
▶ Press the OK button.
▶ Use the cursor buttons
Í or Ú to scroll through the parameters.
▶ Change the values for a parameter set:
• Press OK to enter the Entry mode,
• Press
úí to change decimal place,
• Press
ÍÚ to change the value of a decimal place,
• Press OK to save constants or
• ESC Retain previous setting.
Press ESC to leave the parameter display.
5.3.1 Adjustable parameters for function relays
You can also modify the function relay parameters used in the circuit diagram
in the PARAMETER menu.
Adjustable setpoint values are:
• With all function relays the setpoints
• On and off times with time switches.
In RUN mode easy operates with a new setpoint as soon as it has been
modified in the parameter display and saved with OK.
5.3.1.1 Example: Changing switch times for outdoor lighting
The outdoor lighting of a building is automatically switched on from 19:00 to
23:30 Mondays to Fridays in the easy circuit diagram.
The parameter set for the time switch function relay 1 is saved in channel A
and looks like this.
From the following weekend, the outdoor lighting is now also required to
switch on between 19:00 and 22:00 on Saturdays.
▶ Select PARAMETER from the main menu.
The first parameter set is displayed.
▶ Use Í or Ú to scroll through the parameter sets until channel A of time
switch 1 is displayed.
▶ Press Í to select the next empty parameter set, in this case channel B of
time switch 1.
The current time is 15:21.
▶ Change the value for the day interval from MO to SA:
•
úí Move between the parameters
• ÍÚ Change value.
▶ Press OK to acknowledge the value SA.
T3 Ü S +
I1 02,030
I2 05,000
T:
Ö1 A 15:21 +
D MO-FR
ON 19:00
OFF 23:30
Ö1 B 15:21 +
D --
ON 00:00
OFF 00:00
Ö1 B 15:21 +
D SA
ON 00:00
OFF 00:00