4 Wiring with
4.1 -operation
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 65
4.1.4 Saving and loading circuit diagrams
There are two ways of saving circuit diagrams in easy externally:
• Saving to a memory card
• Saving on a PC with the easySoft
programming software.
Once they have been saved, programs can be reloaded into easy, edited and
run.
All circuit diagram data is saved in easy. In the event of a power failure the data
will be retained until the next time it is overwritten or deleted.
4.1.4.1 Memory card
Each EASY-M-32K memory card contains a circuit diagram which is inserted
into the easy interface. The program is stored retentively on the memory
card.
The way the memory card works and a description of how to transfer a
program to the card, (￫ Section "6.7 Memory card“, page 197)
4.1.4.2 Soft
easySoft-Basic and easySoft-Pro are PC programs for creating, testing and
managing easy circuit diagrams.
Completed circuit diagrams are transferred between your PC and easy via
the connecting cable. Once you have transferred a circuit diagram, simply run
easy straight from your PC.
Details on the program and transferring circuit diagrams, (￫ Section
"6.8 Soft“, page 200).
￫
EASY-M-8K memory cards of easy400 devices can be read in
easy500. Memory cards of easy400 EASY-M-8K and easy600
EASY-M16K devices can be read in easy700.
Write operations from easy500 and easy700 are only possible to
the EASY-M32K memory card.
To Next Page
Loading...
