6 Internal
6.8 Soft
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 201
If there are transmission problems, easy will display the INVALID PROG
message.
▶ Check whether the circuit diagram is suitable for the destination device.
Figure 101: Removing the EASY-PC-CAB
▶ After transmission, remove the cable and close the interface.
6.8.2 Soft help
easySoft is provided with an extensive Online Help.
▶ Start easySoft-Basic or easySoft-Pro and click the ? menu item in order to
open the Help.
The help provides all the additional information about easySoft that you will
need.
￫
If the operating voltage fails during communication with the PC,
repeat the last step. It is possible that not all the data was
transferred between the PC and easy.
To Next Page
Loading...
