2 Installation
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 25
2 Installation
easy must only be installed and wired up by trained electricians or other
persons familiar with the installation of electrical equipment.
easy is installed in the following order:
• Assemble devices if necessary,
• Mounting,
• Wiring up the inputs,
• Wiring up the outputs,
• Connecting the power supply.
DANGER
Never carry out electrical work on the device while the power
supply is switched on, there is danger of electric shock.
Always follow the safety rules:
• Switch off and isolate
• Secure against retriggering.
• Verify isolation from the supply.
• Cover adjacent live parts.
To Next Page
Loading...
Need help?
General