Eaton easy500, easy700

5 settings
5.4 Setting date and time
170 Operating instructions 05/10 MN05013003Z-EN www.eaton.com
▶ Change the ON value to 19:00.
▶ Move to the value of ON
▶ Press OK
•
úí Move between the parameters
• ÍÚ Change value.
▶ Press OK to acknowledge the value 19:00.
▶ Set the switching off time to 22:00.
▶ Press OK.
easy will save the new parameters. The cursor will remain in the contact field
on channel identifier B.
Press ESC to leave the parameter display.
The time switch will now also switch on at 19:00 on Saturdays and switch off
at 22:00.
5.4 Setting date and time
The easy500 and easy700 devices are equipped with a real-time clock with
date and time functions. The type reference is EASY…-…-.C. The time
switch function relays can thus be used to implement time switch
applications.
5.4.1 Set time
If the clock is not set or easy is switched on after the battery back-up time
has elapsed, the clock starts with the setting "SA 0:01 01.05.2004“ The easy
clock operates with date and time so that hour, minute, day, month and year
have to be set.
▶ Select SET CLOCK… from the main menu.
This will open the menu for setting the time.
▶ Select SET CLOCK and confirm with OK.
▶ Set the values for time, day, month and year.
▶ Press the OK button to access the Entry mode.
•
úí Select the position.
•
ÍÚ Change the value of a parameter
• OK Save day and time.
• ESC Retain previous setting.
Press ESC to leave the time setting display.
Ö1 B 15:21 +
D SA
ON 19:00
OFF 00:00
Ö1 B 15:21 +
D SA
ON 19:00
OFF 22:00
￫
Default settings:
"SA 0:01 01.05.2004“
SET CLOCK
SUMMER TIME
HH:MM: 18:24
DD.MM 01.05
YEAR : 2004