4 Wiring with
4.12 Year Time Switch
144 Operating instructions 05/10 MN05013003Z-EN www.eaton.com
4.12.8.5 Example 5: Specific days of specific months (1-channel)
The year time switch Y01 is required to switch on at 0:00 on day 9 of months
6, 7, 8, 9 and 10 of each year and switch off at 00:00 on day 17 of the month.
Figure 78: Chose specific days of specific months
4.12.8.6 Configuring the parameters for continuous periods of time
The following examples show how to configure the parameters for
continuous periods of time in which the time switch remains continuously
switched on. The parameter definition is carried out in pairs on two adjacent
channels.
Example 6: Time range for each year (2-channel)
The year time switch Y1 is required to switch on at 00:00 on day 02.05 of
each year and stay on continuously until 00:00 on 1.11 of each year.
“Open air season”.
Figure 79: Select time range for each year
① + ② First and last on year as well as
③ + ④ First and last off year are unlimited here
Circuit diagram display Parameter settings of the year time switch Y1
16 16 16
9 99
... Juli August September ...
Y1 A +
ON 09.06.--
OFF 16.10.--
Circuit diagram display Parameter settings of the year
time switch Y1
31/10
... 2010 2011
31/10 31/10 31/10
2/5 2/5 2/5
2012 ...
Y1 A +
ON 02.05.--
OFF --.--.--
Y1 B +
ON --.--.--
OFF 31.10.--
To Next Page
Loading...
