Eaton SmartWire-DT SWD Series - Page 162

7 Pilot devices M22-SWD…
7.2 M22-SWD front mount
158 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com
Table 32: Combination options for the M22 front element
with SmartWire-DT function elements
The SmartWire-DT function element always occupies the middle slot of the
M22 adapter. If required, standard M22-K10/K01 contact elements can also
be plugged into the free slots. The M22-SWD-A4 adapter is fitted with two
M22-SWD-K22 function elements.
The following table shows what possibilities there are for this.
Table 33: Configurations of the M22-A adapter
front element
Adapter SmartWire-DT function
element (front mount)
M22(S)-PV(T) M22-A M22-SWD-K11
M22(S)-PVL(T)
M22-A M22-SWD-K11LED
M22(S)-DDL
M22-A M22-SWD-K22LED
M22(S)-D(R)(H)
M22-A M22-SWD-K11
M22(S)-D(R)P
M22-A M22-SWD-K11
M22(S)-W(R)K
M22-A M22-SWD-K11
M22(S)-WKV
M22-A M22-SWD-K11
M22(S)-W(R)K3
M22-A M22-SWD-K22
M22(S)-W(R)S-(SA)
M22-A M22-SWD-K11
M22(S)-W(R)S3-(SA)
M22-A M22-SWD-K22
M22(S)-L(H)
M22-A M22-SWD-LED
M22(S)-D(R)L(H)
M22-A M22-SWD-K11LED
M22(S)-W(R)LK
M22-A M22-SWD-K11LED
M22(S)-W(R)LK-3
M22-A M22-SWD-K22LED
M22(S)-WLKV-3
M22-A M22-SWD-K22LED
M22(S)-W…4…
M22-SWD-A4 2 x M22-SWD-K22
M22(S)-D…4…
M22-SWD-A4 2 x M22-SWD-K22
M22-WJ2…
M22-SWD-A4 2 x M22-SWD-K22
Function element
Configuration of the M22-A adapter (front
mount - viewed from the rear while equip-
ping the adapter)
Marking on adapter 1/4 3/6 2/5
M22-SWD-K11
O X
1)
O
2)
M22-SWD-LED O X O
M22-SWD-K11LED
O X O
M22-SWD-K22
O X X
M22-SWD-K22LED
O X X
1) X = occupied by SWD element
2) O = optional for an additional M22-K10/K01 element