Eaton SmartWire-DT SWD Series - Page 181

7 Pilot devices M22-SWD…
7.2 M22-SWD front mount
SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 177
7.2.9.5 M22-SWD-K11LED-(W/B/G/R)
The function element has one input byte and one output byte at its disposal.
Input points
Byte 0:
Outputs
Byte 0:
76543210
SUBST PRSNT – DIAG – – NO1 NC1
numer-
ical
convert
er
Bit
Designation Description
0 NC1 = Normally Closed 0: contact actuated
1: contact not actuated
1
NO = Normally Open 0: contact not actuated
1: contact actuated
2
Not used –
3
Not used –
4
DIAG 0: no diagnostic alarm
1: Diagnosis present
5
Not used –
6
PRSNT 0: Module not available
1: Module available
7
SUBST 0: Configured module present
1: Universal module M22-SWD-NOP(C) present
76543210
DIM2 DIM1 DIM0 – – – – Q0
Bit
Designation Description
0 Q0 Activation of the LED
1
Not used –
2
Not used –
3
Not used –
4
Not used –
NO1
NC1