Eaton SmartWire-DT SWD Series - Page 194

7 Pilot devices M22-SWD…
7.3 M22-SWD base fixing
190 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com
7.3.2.1 Connection of the round cable to the cable gland
Figure 64: Connection with a cable gland
7.3.2.2 Connection of the round cable via a plug-in connection
The SmartWire-DT card is connected via 8 pole enclosure bushings executed
as sockets or plugs.
Figure 65: Plug connection
Connection to the round cable in this case is via 8 pole plugs/sockets.
1
3
2
2
IN
V-M20
Housing bushing sockets SWD Element
Housing bushing socket for M22 SWD4-SF8-20
Housing bushing plug for M22
SWD4-SM8-20
Housing bushing sockets
SWD Element
Socket, straight, 8-pole SWD4-SF8-67
Plug, flat, 8-pole
SWD4-SM8-67
Socket, angled at 90°, 8 pole
SWD4-SF8-67W
Plug, angled at 90°, 8 pole
SWD4-SM8-67W
1
3
2
1
3
2
1
3
2
IN
OUT
OFF
ON
SWD4-SF8-20
SWD4-SM8-20
IN
OUT