7 Pilot devices M22-SWD…
7.3 M22-SWD base fixing
200 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com
7.3.9.4 M22-SWD-K11LEDC-(W/B/G/R)
The function element has one input byte and one output byte at its disposal.
Input points
Byte 0:
Outputs
Byte 0:
76543210
SUBST PRSNT – DIAG – – NO1 NC1
numer-
ical
convert
er
Bit
Designation Description
0 NC1 = Normally Closed 0: contact actuated
1: contact not actuated
1
NO1 = Normally Open 0: contact not actuated
1: contact actuated
2
Not used –
3
Not used –
4
DIAG 0: no diagnostic alarm
1: Diagnosis present
5
Not used –
6
PRSNT 0: Module not available
1: Module available
7
SUBST 0: Configured module present
1: Universal module M22-SWD-NOP(C) present
76543210
DIM2 DIM1 DIM0 – – – – Q0
Bit
Designation Description
0 Q0 Activation of the LED
1
Not used –
2
Not used –
3
Not used –
4
Not used –
5
DIM0 Dimming setting adjustments (device version 02 and
higher)
6
DIM1
7
DIM2
NO1
NC1
To Next Page
Loading...
