WaveRIDER 107
To change a password:
1) Select the Passwords command from the Preferences sub-menu and a Password
Protection dialog box appears.
Figure 5- 14: Password Protection Dialog Box
2) Click the Change Password command button and the Password Change dialog
box appears.
Figure 5- 15: Change Password Dialog Box.
The software has a default password Admin. When the password is changed for
the first time, Admin will need to be entered in the “Current Password” text box.
3) Enter current password in the Current Password text box.
4) Enter a new password in the New Password text box.
The software only accepts passwords with a minimum of 4 characters.
Enter the new password again in the Confirmation text box and then click the OK
command button to accept or Cancel to not change the password.