ECD WaveRIDER Series User Manual

174 WaveRIDER
Maximum (-) Slope is the largest negative slope measured using a 2% of the total
points in the Profile length (x-axis) differential. Thus, the equation for slope calculation is
as follows:
Slope at point n = (Value at point (n + 10) – Value at point n) / (10 * Log interval in
seconds)
Figure D- 4: Max (-) Slope
The values below are the largest negative slope values calculated for each channel.
The larger the slope, the faster the temperature is falling (cooling).
MAX (-)
SLOPE

ECD WaveRIDER Series Specifications

General

Brand	ECD
Model	WaveRIDER Series
Category	Measuring Instruments
Language	English