180 WaveRIDER
● Time Parameter Data:
Time To Temperature is the time that it takes for each channel to reach the selected
value in seconds or minutes.
Time above Temperature is the total time spent at or above the selected temperature
in seconds or minutes.
Total (+/-): Total Time above temperature.
Rising (+): Time above during the rising portion of the temperature Profile.
Falling (-): Time above during the falling portion of the temperature Profile.
Time between Temperatures is the time required for the temperature to rise from the
begin temperature to the end temperature in seconds or minutes.
Slope between Temperatures is the straight line slope measured between the
beginning and ending temperatures.
● Display Values:
Range is the difference between the largest and smallest value recorded or calculated
for each column of data. The smaller the range, the smaller the spread between the
values collected from each channel.
Average is the calculation of the average value for each column displayed.
Standard Deviation is the calculation of the Standard Deviation for each column
displayed.
To Next Page
Loading...
Need help?
General
