ECD WaveRIDER Series User Manual

WaveRIDER 61
4.4.9.1 Value
When the Value Tab is selected, the Data Table lists the temperature at the point where
an X-cursor intersects a Data Plot. There are four X-cursors and the positions can be
changed at any time by moving the X-cursor (Refer to the descriptions in section
4.4.10.5 X-Cursors). As an X-cursor is moved, the values in the Data Table are
automatically updated.
Figure 4- 30: Value Data Tab
Values in the Data Table depend on the units of the X and Y-axis.

ECD WaveRIDER Series Specifications

General

Brand	ECD
Model	WaveRIDER Series
Category	Measuring Instruments
Language	English