ECD WaveRIDER Series User Manual

62 WaveRIDER
4.4.9.2 Time to Reference
When the Time to Reference Tab is selected, the Data Table displays the time it takes
the channels to reach fixed Temperature Reference Line(s). Times are expressed as
HH:MM:SS (H=hours, M=minutes, S=seconds). Up to three Temperature Reference
Lines can be added to the Data Graph that are used in this statistic by using the Temp
Ref Lines command in the Profile menu.
Figure 4- 31: Time to Ref Data Tab

ECD WaveRIDER Series Specifications

General

Brand	ECD
Model	WaveRIDER Series
Category	Measuring Instruments
Language	English