ECD WaveRIDER Series User Manual

WaveRIDER 63
4.4.9.3 T Above Ref
When the T Above Ref Tab is selected, the Data Table shows the amount of time each
sensor measured data above the Temperature Reference Lines. Times are expressed
as HH:MM:SS (H=hours, M=minutes, S=seconds) and are the total time above
reference line regardless of when the value was above.
Figure 4- 32: T Above Ref Data Tab
Temperature Reference Lines can be added, deleted, or moved at any time using
the Temp Ref Lines command in the Profile menu.

ECD WaveRIDER Series Specifications

General

Brand	ECD
Model	WaveRIDER Series
Category	Measuring Instruments
Language	English