Text Defines the text displayed below the Value parameter.
Use icon This parameter allows to display an icon instead of a text.
Icon texture Allows to select an icon from a texture menu. You can add a custom icon
(more information about managing textures is provided further in the
manual)
Icon scale The icon size is automatically adapted to the indicator size. It is possible
to change its size using the Icon Scale parameter.
Alarm channel A channel / function allowing to change the indicator colour when its
value differs from 0. The alarm colour is defined in the Alarm Color field.
Radius The indicator diameter in pixels.
Border Size The width of the line surrounding the indicator in pixels. Decimal values
are possible.
Highlight percent Indicates the part of the indicator that is to be filled with Highlight color.
0 means that the entire indicator is filled with the Background color
Num ticks This value defines the number of parts into which the indicator area is to
be divided. For each part a respective value and marker in the form of a
section will be displayed.
Num subticks This value defines the number of divisions between the main markers
Indicator width The width of the hand showing the current value
Angle span The range in degrees within which the indicator is to be divided (the
example shows 270 degrees).
Angle offset The initial angle of the first marker (0 in our example)
Color The colour of the value, legend and markers displayed
Border color The indicator frame colour
Highlight color The “highlight” area colour
Indicator color The “hand” colour
Background color The background colour
Text color The text or icon colour
Unit color The measurement unit colour
Alarm color The colour to which the indicator and the displayed value will change if
the value of the variable used in Alarm channel differs from 0.
Tick font The size of the font used for displaying the legend
Value font The size of the font used for displaying the size of the font used for
displaying values
Text font The size of the font used for displaying the text
Unit font The size of the font used for displaying the measurement units
Redline when The condition for displaying the indicator in the “redline” mode.
Page 55/137
To Next Page
Loading...
General