Adding page elements
We will now create an example page. Let’s start with placing a Rect item on it. You may position
the item by left clicking and dragging it. If you are connected to your ADU device, the item will also
move on the display. You can change the Rect item parameters in the Page editor. After entering
the parameters shown below, the page will look as follows:
Now, we will add the current lap time. To do this, a Time item should be added.
We will use a Text item to visually represent the time function we just created. In the Text field,
type what you want to display, then choose the text colour. When creating a Text item, you may
define both the static and dynamic elements of the displayed text. This will be discussed in more
detail further in the chapter.
Page 40/137
To Next Page
Loading...
General