Color 1 When using the On/Off type, it defines the colour when the variable in the
Channel field assumes a value different from zero, When using the Choose
and Choose + override type, it defines the colour when the variable in the
Channel field equals zero
Color 2 When using the Choose and Choose + override type, it defines the colour
when the variable in the Channel field differs from zero
Channel 3 A variable defining the third state When using the Choose + override type
Color 3 When using the Choose + override type, it defines the colour when the
variable in the Channel 3 field differs from zero
Brightness The brightness of individual LEDs
Page 87/137
To Next Page
Loading...