Analyzer User Guide
Export Filtered Trace Based on Overview
With this selection, the user can export the current trace based on the filtering applied.
Export of Bluetooth Raw Data and Payload
With this selection, the user can export into raw data (including headers, etc.) and/or payload
into CSV, text, or XML formats. The item’s name and timestamp can be exported or excluded.
The user may include root items only, or may select a hierarchy of items to export.
Export of Bluetooth Raw Packet Input Format
With this selection, the user can export the packets in a capture to an ASCII format.
Export of Bluetooth Audio
With this selection, the user can quickly export any captured SCO, eSCO, and A2DP audio
streams in the active Overview to WAV format. A PCM (Pulse-Code Modulation) selection allows
the user to specify buffering, no buffering, or to select a specific synchronization buffer length.
Audio streams are exported by direction, and individual audio streams are exported into
separate WAV files.
Export of Bluetooth Mobile Phone Data
With this selection, the user can export mobile phone information, including VCard and short
messaging. The user can elect to export a single file, one file per transfer, or one file per item.
If a photo is attached to the export, the user may elect to include or exclude the photo.
Export of a Message Sequence Chart
This selection exports a graphical master/slave depiction of message procedures from the active
Overview. The display of procedures is controlled by selections available in the export menu,
including Compact, Expand, and Flatten, as shown below.
Various export options are available, including display of timestamps, protocol layers, item
parameters, scale, and page orientation, as shown below:
44 of 201 | Managing Capture Files
To Next Page
Loading...
Need help?
General
