Endress+Hauser Proline Prosonic Flow P 500 - Output Values

Proline Prosonic Flow P 500 HART Operation
Endress+Hauser 151
Input values of status input
The Status input 1 to n submenu contains all the parameters needed to display the
current measured values for every status input.
Navigation
"Diagnostics" menu → Measured values → Input values → Status input 1 to n
‣
Status input 1 to n
Value status input
→  151
Parameter overview with brief description
Parameter Description User interface
Value status input Shows the current input signal level. • High
• Low
11.4.4 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
‣
Current output 1 to n
→  151
‣
Pulse/frequency/switch output
1 to n
→  152
‣
Relay output 1 to n
→  152
‣
Double pulse output
→  153
Output values of current output
The Value current output submenu contains all the parameters needed to display the
current measured values for every current output.
Navigation
"Diagnostics" menu → Measured values → Output values → Value current output 1 to n
‣
Current output 1 to n
Output current
→  152
Measured current
→  152