Endress+Hauser Proline Prosonic Flow P 500 - Turning the Display Module: Proline 500; Turning the Transmitter Housing: Proline 500

Mounting Proline Prosonic Flow P 500 HART
44 Endress+Hauser
6.2.6 Turning the transmitter housing: Proline 500
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned.
N
i
c
h
t
u
n
t
e
r
a
r
e
ö
f
f
n
e
n
+
E
ESC
–
1.
2.
3 mm
N
i
c
h
t
u
n
t
e
r
a
r
e
ö
f
f
n
e
n
+
E
ESC
–
3.
4 mm
4.
7 Nm (5.2 lbf ft)
A0029993
 43 Non-Ex housing
1. Depending on the device version: Loosen the securing clamp of the connection
compartment cover.
2. Unscrew the connection compartment cover.
3. Loosen the securing screw.
4. Turn the housing to the desired position.
5. Tighten the securing screw.
6. Screw on the connection compartment cover.
7. Depending on the device version: Attach the securing clamp of the connection
compartment cover.
1.
2.
3.
4 mm
7 Nm (5.2 lbf !)
A
A
A0043150
 44 Ex housing
1. Loosen the fixing screws.
2. Turn the housing to the desired position.
3. Tighten the securing screws.
6.2.7 Turning the display module: Proline 500
The display module can be turned to optimize display readability and operability.