Endress+Hauser Proline Prosonic Flow P 500 - WLAN Configuration

Proline Prosonic Flow P 500 HART Commissioning
Endress+Hauser 133
10.5.5 WLAN configuration
The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN settings
‣
WLAN settings
WLAN
→  133
WLAN mode
→  133
SSID name
→  133
Network security
→  134
Security identification
→  134
User name
→  134
WLAN password
→  134
WLAN IP address
→  134
WLAN MAC address
→  134
WLAN passphrase
→  134
Assign SSID name
→  134
SSID name
→  134
Connection state
→  134
Received signal strength
→  134
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
WLAN – Switch WLAN on and off. • Disable
• Enable
Enable
WLAN mode – Select WLAN mode. • WLAN access
point
• WLAN Client
WLAN access point
SSID name The client is activated. Enter the user-defined SSID
name (max. 32 characters).
– –