Accessories Proline Prosonic Flow P 500 HART
192 Endress+Hauser
15.3 Service-specific accessories
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Choice of measuring devices for industrial requirements
• Calculation of all the necessary data for identifying the optimum flowmeter:
e.g. nominal diameter, pressure loss, flow velocity and accuracy.
• Graphic illustration of the calculation results
• Determination of the partial order code, administration, documentation and
access to all project-related data and parameters over the entire life cycle of
a project.
Applicator is available:
• Via the Internet: https://portal.endress.com/webapp/applicator
• As a downloadable DVD for local PC installation.
Netilion lloT Ecosystem: Unlock knowledge
With the Netilion lloT Ecosystem, Endress+Hauser enables you to optimize
your plant performance by digitizing workflows, creating knowledge and
establishing new levels of collaboration.
Building decades of expertise in process automation, Endress+Hauser provides
the process industry with an lloT Ecosystem that allows data-driven insights.
These insights can be applied to optimize processes resulting in increased
plant up-time, efficiency, reliability – and ultimately, a more profitable plant.
www.netilion.endress.com
FieldCare FDT-based plant asset management tool from Endress+Hauser.
It can configure all smart field units in your system and helps you manage
them. By using the status information, it is also a simple but effective way of
checking their status and condition.
Operating Instructions BA00027S and BA00059S
DeviceCare Tool to connect and configure Endress+Hauser field devices.
Innovation brochure IN01047S
15.4 System components
Accessories Description
Memograph M graphic
data manager
The Memograph M graphic data manager provides information on all the relevant
measured variables. Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are stored in the 256 MB
internal memory and also on a SD card or USB stick.
• Technical Information TI00133R
• Operating Instructions BA00247R
iTEMP The temperature transmitters can be used in all applications and are suitable for
the measurement of gases, steam and liquids. They can be used to read in the
medium temperature.
"Fields of Activity" document FA00006T
To Next Page
Loading...
