Endress+Hauser Proline Prosonic Flow P 500 - Transmitter Nameplate

Incoming acceptance and product identification Proline Prosonic Flow P 500 HART
16 Endress+Hauser
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The "Additional standard documentation on the device" and "Supplementary device-
dependent documentation" sections
• The Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations app: Enter the serial number from the nameplate or
scan the DataMatrix code on the nameplate.
4.2.1 Transmitter nameplate
Proline 500
Order code:
Ser. no.:
Ext. ord. cd.:
i
i
Date:
1 2 3 4 5
20
19
6
7
8
9
13 12 1011
18
17
16
14
15
A0029192
 2 Example of a transmitter nameplate
1 Manufacturer address/certificate holder
2 Name of the transmitter
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (ext. ord. cd.)
6 Degree of protection
7 Space for approvals: use in hazardous areas
8 Electrical connection data: available inputs and outputs
9 2-D matrix code
10 Date of manufacture: year-month
11 Document number of safety-related supplementary documentation
12 Space for approvals and certificates: e.g. CE mark, RCM tick
13 Space for degree of protection of connection and electronics compartment when used in hazardous areas
14 Firmware version (FW) and device revision (Dev.Rev.) from the factory
15 Space for additional information in the case of special products
16 Permitted temperature range for cable
17 Permitted ambient temperature (T
a
)
18 Information on cable gland
19 Available inputs and outputs, supply voltage
20 Electrical connection data: supply voltage