Endress+Hauser Proline Prosonic Flow P 500 - Requirements

Operation options Proline Prosonic Flow P 500 HART
76 Endress+Hauser
8.4.2 Requirements
Computer hardware
Hardware Interface
CDI-RJ45 WLAN
Interface The computer must have a RJ45
interface.
1)
The operating unit must have a WLAN
interface.
Connection Standard Ethernet cable Connection via Wireless LAN.
Screen Recommended size: ≥12" (depends on the screen resolution)
1) Recommended cable: CAT5e, CAT6 or CAT7, with shielded plug (e.g. YAMAICHI product; part no. Y-
ConProfixPlug63/Prod. ID: 82-006660)
Computer software
Software Interface
CDI-RJ45 WLAN
Recommended operating
systems
• Microsoft Windows 8 or higher.
• Mobile operating systems:
• iOS
• Android

Microsoft Windows XP and Windows 7 is supported.
Web browsers supported • Microsoft Internet Explorer 8 or higher
• Microsoft Edge
• Mozilla Firefox
• Google Chrome
• Safari
Computer settings
Settings Interface
CDI-RJ45 WLAN
User rights Appropriate user rights (e.g. administrator rights) for TCP/IP and proxy server
settings are necessary (e.g. for adjusting the IP address, subnet mask etc.).
Proxy server settings of the
web browser
The web browser setting Use a proxy server for your LAN must be disabled .
JavaScript JavaScript must be enabled.

If JavaScript cannot be enabled:
Enter http://192.168.1.212/servlet/
basic.html in the address bar of the web
browser. A fully functional but simplified
version of the operating menu structure
starts in the web browser.

When installing a new firmware version:
To enable correct data display, clear the
temporary memory (cache) under
Internet options in the web browser.
JavaScript must be enabled.

The WLAN display
requires JavaScript
support.
Network connections Only use the active network connections to the measuring device.
Switch off all other network connections such
as WLAN for example.
Switch off all other network
connections.
In the event of connection problems: →  160