Endress+Hauser Proline Prosonic Flow P 500 - Carrying out a Sensor Adjustment; Configuring the Totalizer; Using the Parameter to Enter the Access Code

Commissioning Proline Prosonic Flow P 500 HART
126 Endress+Hauser
‣
WLAN settings
→  133
‣
Configuration backup
→  134
‣
Administration
→  136
10.5.1 Using the parameter to enter the access code
Navigation
"Setup" menu → Advanced setup
Parameter overview with brief description
Parameter Description User entry
Enter access code Enter access code to disable write protection of parameters. Max. 16-digit character string comprising
numbers, letters and special characters
10.5.2 Carrying out a sensor adjustment
The Sensor adjustment submenu contains parameters that pertain to the functionality of
the sensor.
Navigation
"Setup" menu → Advanced setup → Sensor adjustment
‣
Sensor adjustment
Installation direction
→  126
Parameter overview with brief description
Parameter Description Selection Factory setting
Installation direction Select sign of flow direction. • Forward flow
• Reverse flow
Forward flow
10.5.3 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable 1 to n
→  128
Process variable unit 1 to n
→  129